Instruction Video's
Speed Rope 2.0
Step 1: Remove the speed rope and the Allen key from the RXpursuit pouch.
Step 2: Cut the tyrap.
Step 3: Hold both handles and unroll the speed rope cable.
Step 4: Slowly slide the loose handle to the other side of the cable.
Step 5: Hold the handle at the center of the chest and stand with one foot on the cable.
Step 6: Gently bring the loose handle to the center of the chest, next to the handle that is attached.
Step 7: Tighten the loose handle with the Allen key. Tighten it extra tight.
Step 8: Tighten the handle that is already tightened for extra security.
Step 9 (optional): Use sharp pliers to cut off the remaining piece of cable and place the rubber cap back on the cable to remove the sharp edges.
Speed Rope 1.0
Step 1: Remove the speed rope from the RXpursuit pouch.
Step 2: Cut the tyrap.
Step 3: Hold both handles and let the speed rope roll out.
Step 4: Hold one handle near the center of the chest and stand with one foot on the cable.
Step 5: Gently bring the other handle to the center of the chest as well. Both handles are now at the correct height.
Step 6: Gently tighten the cable until it is under tension.
Step 7: Guide the screw to the handle and tighten it semi-tight.
Step 8: Tighten both handles with a screwdriver, just to be sure.
Step 9 (optional): Using sharp pliers, cut off the remaining piece of cable and place the rubber cap back on the cable to eliminate the sharp edges.
Grips
Discover your size here:
To find out the perfect size, we advise you to measure your hand.
- Measure from the top of your palm (the bottom of your middle finger) to the beginning of your wrist.
- Use the diagram below to determine which size grip is perfect for you.
- When in doubt, choose one size larger.
10,5cm: Size S
11cm: Size M
11.5cm: Size L
12cm: Size XL